We all want the have a sharp chainsaw, after all, what use would a chainsaw be if the teeth were not sharp enough? Not much use at all!
And so, it’s important to ensure that you are sharpening your chainsaws teeth regularly. In this article, JointForestryTeam will be covering several ways of doing that. But with the focus on one way in particular, by using the Timberline Chainsaw Sharpener.
You might be reading that and wondering what on Earth it is, and how you use it, or even get your hands on it. Well not to worry, this article is going to reveal everything.
Why chains should be sharp
If you’re new to chainsaws, as in very very new, you might be wondering why it matters that your chainsaw is sharp.
When you cut wood with a chainsaw, the teeth will lock themselves into the wood, this enables you to cut it at high speeds. Only sharp teeth will be able to quickly and efficiently lock themselves into place and stay there throughout the duration of the cut. Dull teeth will have a higher chances of bouncing off the wood.
Sharp teeth also ensure that all of your cuts are smooth. When you’ve finished cutting, you want to be left with a flat circle not a wooden hill.
Of course, as well as the Timberline Chainsaw Sharpener, there are other alternatives. Some of them cheaper and some of them quicker.
The cheapest method is probably just using a file. This method involves rubbing a thin metal file against each tooth until it’s sharp. But the issue with this is that it takes a lot of time, and often the results aren’t as good as they should be.
Another method would be to an electric sharpener. But the problem with these devices is that they can be very expensive and again, the results are often fat from perfect.
I have had a look on their website to find out a little bit about the history of Timberline and how they came to create their famous chainsaw sharpener. But unfortunately, because they are such a new company, there wasn’t anything on their website which related to the history or story of the sharpener.
However, one thing that the website does make clear is that this product is reliable and American made. It’s made for people who work with chainsaws on a regular basis, and who take their lumber work very seriously.
So what is it?
The Timberline Chainsaw Sharpener is a very small device. So small infact, it can easily fit into the hands of most American men. But don’t be fooled by it’s size!
It may be small, but it can do the job very well. This contraption fits onto the bar of any chainsaw, and will enable you to make your chainsaw’s teeth as sharp as them can get. It doesn’t require electricity, which means that you can sharpen your chainsaw, even if you’re miles away from any power source. And what’s more, the sharpness from this device is better than the sharpness from many of the electrical sharpeners.
How to use it
I’m going to be honest with you. Using this device is not the quickest way to sharpen a chainsaw. However, it is arguably the most efficient.
What you need to do is attach it to the bar of your chainsaw, adjust the height by inserting the carbide cutter, and then tighten. Then, reinsert the cutter into the other hole, and sharpen the tooth by spinning the crank clockwise. Once you’ve done one tooth, remove the cutter and move the next tooth into place. This is a highly simplified version of the instructions and a better version can be found in many YouTube videos.
On several websites, the Timberline chainsaw sharpener has received plenty of positive reviews. And here are just a few of them. …
“I have had my Timberline Chainsaw Sharpener for a little over a year and LOVE IT! This is a great tool and easy to use and will quickly pay for itself.”
“I have to say, I was very wary about purchasing this item because of the cost. If you are wary as well….wary no more!! Though it is time consuming to use this sharpener, makes chains cut through soft, and hardwoods, like a hot knife through butter.”
“The product works as advertised and produces an accurate and sharp (better than factory) chain. It’s very expensive for what it is, but I figure it will pay me back in the long run on reduced chain wear due to sharpening The product works as advertised and produces an accurate and sharp (better than factory) chain. It’s very expensive for what it is, but I figure it will pay me back in the long run on reduced chain wear due to sharpening”
Looking at reviews of this tool from across several websites, it’s clear that it’s a product that does cost quite a bit, but does the job it’s intended to very well, and is certainly worth the high cost.
However, that’s not to say that everyone is a happy customer.
A very select few number of people disagree with the common consensus that this is a great product that’s well worth the money. This small group says that actually, it doesn’t work as well as people claim it does, and that your money is going to be better spent on buying an electric chainsaw sharpener.
When you’re working with a chainsaw, it’s important to make sure that the teeth are as sharp as you can possibly get them. And whilst just using a file, or using an electric sharpener are good, the best option is probably to use the Timberline Chainsaw sharpener. It’s an American made product that does cost a lot of money, and is rather time consuming, but according the most of it’s customers, does do an amazing job, and is worth every penny in the long run.
So if you run your own tree cutting business, then this little contraption is quite simply a must have.