bookmark_borderSelf-Sharpening Chainsaws: What you may want to know?

There is no doubt that chainsaws are the most reliable cutting tools available to any lumberjack. When new, some of them can cut through any toughest wood thrown at them. However, after some time, the cutting edge becomes somewhat blunt. If you find yourself putting more pressure on the chainsaw than usual, then it needs service.

The most probable solution is sharpening the teeth. But how do you do that? Well, that depends on the type of chainsaw you have. Whichever tool you will use will be determined by several factors, including the size of the teeth. Others can self-sharpen, and these are the focus of our article today. Let us first look at some of the common sharpening techniques.

Self-Sharpening Chainsaws

Common Chainsaw Sharpening Methods

File Sharpening

One of the most popular methods is the use of a file. To achieve the task, you will need a specially made file, usually round, and a file guide. The work of the file guide is to ensure that you maintain the correct angle. Why should you do that?

Every chainsaw has a specific sharpening angle which will ensure uniformity across all the teeth. It can be anywhere between 25 and 30 degrees depending on the saw’s manual. Failure to comply with this might have serious repercussions, and you could find yourself buying a new chain.

One obvious disadvantage is accuracy since you will be majorly relying on your intuition. Another one is, of course, time and energy. Unless you have enough time, this might bring a lot of inconveniences to your plans.

Electric Sharpening

This category is further divided into two; portable and mounted sharpeners. For a portable electric sharpener, you can hold it in your hand and complete the task. It is most suitable for those who are always on the move. Mounted ones can either be fixed on a table or the wall (consider where it is convenient for you).

This technique is way better and faster than the previous one. As stated before, accuracy is key when it comes to sharpening, and mounted electric chainsaw sharpeners provide that. Also, it is not as time-consuming as manual sharpening.

Self-sharpening

This is the third method, but it is not quite popular despite being in existence for over 50 years now. It was invented in the 1960s, and new chainsaw models featuring this technology were released around the same time. Since then, it has been an up-and-down ride in the market.

These models have never gained massive popularity like the rest. Some of the reasons could be the inferior saws and less effective parts attached to them. But there have been a lot of improvements over the years to be able to attract more users. The world’s well-k known brand, Oregon, is one of the leading pioneers of the self-sharpening saws.

If you are one of those who find manual sharpening as a brutal chore, then you only have two choices; an electric sharpener or a self-sharpening chainsaw. An electric sharpener requires additional equipment, another reason why some people prefer self-sharpeners.

The Original Self-Sharpeners

In the 1960s, the world of wooding was introduced to a whole new product. However, the new models of chainsaws that had this new (at the time) technique did not live up to expectations. The first ones to be released had a sharpening stone attached to the clutch cover. The idea was that this stone could be applied to the outside of the blade and as the chain ran past it, the teeth would be sharpened.

Fast Forward…

Recently, Oregon and other manufacturers within the industry came up with a much-improved technology. Here are some of the best self-sharpening chainsaws currently in the market.

  1. Oregon PowerNow CS250
Oregon PowerNow CS250

If you are looking for the best in this category, then not many chainsaws beat the ability of PowerNow. It comes with an advanced battery technology that ensures better and uninterrupted performance. PowerNow also takes the least time possible to start up.

The powersharp system (Oregon’s self-sharpening technology) ensures that your chainsaw is always up to the task. The lever included helps you control the system and adjust it to the desired functionality. Once you have activated the lever, the system automatically sets ideal angles and starts the process when the chain is running.

  • Oregon CS1500
Oregon CS1500

Another product from Oregon that has gathered a host of good reviews is the CS1500 self-sharpening chainsaw. This is one of the best electric chainsaws by PowerOfTool.com. It comes with an 18-inch guide bar and chain. Both of these cutting equipment (chain and bar) is, of course, from Oregon. The chisel-style cutters never disappoint when it comes to woodcutting. Initially there was a common complaint from users about the falling of the chain, which would sometimes be extreme. This was, however, resolved by the manufacturer and things look great at the moment.

Conclusion

Currently, there are few reputable self-sharpeners in the market because currently not many users fancy them. Oregon and a few other interested manufacturers have continuously made improvements to the existing chainsaws. The fact that these models keep coming and going means people are slowly starting to realise the significance of automatic sharpening. As such, you can be sure that their popularity will hugely rise in the coming years

bookmark_borderProfessional chainsaw sharpener equipment for your need

What do you usually use to sharpen your chainsaw? As a professional working with lumber, it is highly recommended that you have a highly efficient chainsaw. If your chainsaw has dull teeth, then that is one reason why you are not making the most out of your efforts.

Working with an unsharpened chainsaw does not only waste your time but is also quite dangerous to you as an operator. Some of the kickback-related incidences are due to blunt teeth. Therefore it is a safety precaution and also helps increase the lifespan of the chain and other relevant parts.

You will like these:

Chainsaw Sharpener Wheels: What is it and more

The Easiest Way to Sharpen a Chainsaw

Timberline Chainsaw Chain Sharpener Reviews

Professional chainsaw sharpener equipment

The General Operation of a Chainsaw Sharpener

There are two main types of chainsaw sharpeners, and both work quite differently from each other. A manual chainsaw sharpener comprise of a hand-held file, a guide and a depth gauge. The guide is used to direct the movement of the file during sharpening. The depth gauge, on the other hand, is used to make sure that the teeth remain in a consistent depth to allow for uniform cutting during operation.

Another type of chainsaw sharpeners is electric, and they are further divided into two categories. A bench sharpener is fixed in one place, usually on a workbench. With this sharpener, all you need to do is secure your chainsaw in a good position then turn the motor on. Ensure that all the teeth are sharpened uniformly.

A handheld electric chainsaw sharpener, however, is portable and one operates it by moving the device over the cutters. That said, you should know which one of these categories is the best for you as a professional lumberjack. Based on experience, I would recommend using a bench sharpener. One of the main reasons is accuracy. For any professional chainsaw, you will need an accurate sharpener to avoid messing things up and having an ineffective tool when work calls. Besides, using a handheld chainsaw is quite risky for your hands (you should, therefore, wear gloves)

Which is the Best Professional Chainsaw Sharpener?

If you go to the store hunting for a professional chainsaw sharpener, you will find a variety of them. There are several models of this tool, but not all of them will do the trick for a chainsaw that is regularly in operation. The main factors you should consider while buying a new sharpener include angle accuracy, depth gauges, and flexibility. Here are some of the best chainsaw sharpeners for a professional in the industry. Stop guessing and pick the right one from the list below.

OrangeA Electric Sharpener

OrangeA Electric Sharpener

As a professional chainsaw operator, you should always look for the best accessory tools. The OrangeA provides you with pretty much everything you need from a sharpener. It is specifically designed for professional users. You can either mount it on a stable bench or the wall. Just find a perfect position and set the equipment. OrangeA comes fitted with a motor that runs at a speed of up to 3,000 RPM. As such, it works with almost any size chain size. The downside, however, may well be its price. If you are on the lookout for a pocket-friendly chainsaw sharpener, then this might not be ideal for you, especially when it is intended for casual use.

Oregon 520-120

Oregon 520-120

Anyone who has been in this industry long enough knows that Oregon is one brand that never disappoints. Oregon 520-120 is yet another product that delivers as expected. This versatile tool can be used to sharpen blades of different sizes. It comes with inbuilt light and customizable settings to enhance your operation. The price, however, is in the range of $300, which could be quite expensive.

Co-Z Electric

Co-Z Electric

This is a new addition in the sharpener market but has already made a mark. It is made from cast aluminium which promises durability. The reinforced hinges are also quite important to the performance of the sharpener. On top of it, it is also fitted with two grinding wheels.

Oregon 410-120

Oregon 410-120

The Oregon 410-120 is a wall or bench-mounted chainsaw teeth grinder. It could be your ideal choice if you are looking for an affordable yet high-quality sharpener. Some of the features that set it apart from others in the same category include the ease to modify and durability. Its rotor system is powered by 120V AC and is unidirectional. You can also adjust the grinding settings to depth gauge, low profile, or pitch chain grinding depending on what you need. Although it ticks all the boxes for a professional user, it should only be your option if you can’t the others mentioned in this article.

Timber Tuff CS-BMW

Timber Tuff CS-BMW

This list is not complete without Timber Tuff CS-BMW, one of the best currently in the market. This saw chain sharpener is driven by a 110-volt motor equipped with thermo-overload protection. As such, power will be cut off in case of any malfunction or electric shorts. What is impressive about Timber Tuff is that it can achieve up to 3,600 rpm, which makes it suitable for professional use with any chain size. It also has a built-in overhead light to enhance your operation.

In Conclusion…

As you can see, there are several models of chainsaw sharpeners available. The five selected above are currently our best picks and will guarantee you near-perfect output. Note that all of them can be used by any craftsman, but they are more suitable for professionals. OrangeA, for instance, might be quite expensive but it is an investment that you won’t regret.

Finally, as you may realise, all tools listed above are bench-mount electric sharpeners. JointForestryTeam.org recommend that you use this type of sharpeners because of their accuracy. Happy sharpening!

bookmark_borderChainsaw Sharpener Wheels: What is it and more

Now that you have secured one of the best electric chainsaw sharpeners in the market, how much do you know about its sharpening wheel? Every chainsaw has a specific size of teeth, and that demands a give size of the grinding wheels. Maybe you are not quite familiar with this part, so we will take an in-depth look at how it works.

JointForestryTeam.org will also list some of our best picks so that you won’t struggle to find an ideal machine to do the job.11

Chainsaw Sharpener Wheels

What is a Grinding Wheel?

This is a wheel made of an abrasive compound and is usually used to sharpen or grind metals. The process of manufacturing the wheels is a tightly-controlled process. As such, it becomes tough and is able to overcome the toughest conditions. There are several manufacturers of this product, and they all have an advantage and a disadvantage over each other. The best sharpener wheel is the one whose size does not change drastically after every operation. In this article we will look at some of the best chainsaw sharpener wheels currently in the market.

Factors to Consider when selecting a Sharpener Wheel

To select the best wheel for your chainsaw sharpener, you will need to consider these things first.

The material of the chainsaw

Many people fail to take this part into consideration when selecting a sharpener. They assume that any wheel will do the job regardless of the chainsaw model. Well, that is where they go wrong, and that could have serious repercussions both on your wheel and the chainsaw.

Most chainsaws are made entirely of steel (or most parts of it). As you might already know, steel is one of the toughest metals on earth, and it will take the toughest to grind it. Therefore, if you buy low-end wheels, they will wear out before they can even sharpen. For a steel chain, use Barazon wheel and diamond abrasive for carbide-based chains.

Warning: Do not interchange the two mentioned above because they are very incompatible.

Size of the chain’s teeth

This also very important if you want to come out with a perfectly working product. Some lumberjacks use any wheel size on any teeth, which is not recommended. Doing so will lead to a lack of uniformity and will greatly impact the chainsaw’s efficiency during cutting.

The type of teeth in question

It is worth noting that chainsaws come with varying kinds of teeth. Yours might have round teeth while your friend’s saw could have square teeth (chisel-like). If that is the case, then you cannot share the sharpener wheel as they are not compatible.

The chain’s pitch

This will determine the chain thickness that you are going to choose. The two main pitches are 1/4, .325, 3/8 Picco and 3/8, .404. Refer to the manufacturer’s manual to learn more.

Type of sharpener

Last but not least, the type of sharpener you are using will greatly determine which wheel you can choose. Remember, the shaft diameter is fixed; it is upon you to find the right size of the wheel. The one that fits perfectly will allow for better working conditions. A loose wheel could end up causing unprecedented injuries. Therefore, consider the diameter and overall size in this case.

Taking Care of Your Wheel

Like any other product, sharpener wheels also require maintenance. But here we are not talking about adding oil, sharpening or anything of that kind. You will need to flip the wheel inside-out every time you sharpen about 25 chains. This will ensure that the wheel wears evenly throughout its operation.

Some wheels also tend to load up when sharpening. If this is the case with yours, ensure that you clean it regularly using the stick provided.

The Best Chainsaw Sharpener Wheels

Diamond Super Abrasive 4” Wheel

Diamond Super Abrasive 4” Wheel

Does your chainsaw have a carbide tip? Well, Diamond Super Abrasive wheel fits the purpose perfectly. It has an outside diameter of 4.125 inches, which is equivalent to 104.78mm. The bore diameter, on the other hand, is ⅞ inches. With a spacer included, the wheel can fit up to 12-mm shafts.

Norton White Grinding Wheel

Norton White Grinding Wheel

This wheel is made of Aluminum Oxide and is the standard wheel for grinding or sharpening plane irons and chisels. What makes it stand out from the rest is the fact that it also helps keep the tool cooler. One of the main disadvantages of heat during sharpening is that it reduces the cutting edge of the tool being worked on. However, the Norton White Grinding Wheel has this problem sorted. Depending on your preferred size, you can buy this wheel for anything between $19.99 and $29.99.

Foley Belsaw Sharpening

Another manufacturer of these grinding wheels is Foley Belsaw, and it offers a variety of sizes. The wide range of wheels offered by the company will definitely help you in your selection as you look to find the perfect match. Depending on the quality, you will get these wheels for as low as $17.75, and there are others that cost up to $100.

Final Remarks

From my experience, Norton wheels seem to have the edge over most grinding wheels in the market currently. However, that is not to say that the rest are poor at what they do. In fact, grinding and sharpening are quite complex tasks, and how you do it will determine your choice. If you want a first sharpening tool, then you should for the one that removes more material in the first round – and that is Norton. On the other hand, if you are more concerned about accuracy than time, then a wheel that does the opposite of what Norton provides is your ideal pick.

Real also:

The Easiest Way to Sharpen a Chainsaw

Timberline Chainsaw Chain Sharpener Reviews

bookmark_borderThe Easiest Way to Sharpen a Chainsaw

A chainsaw is an important tool for any professional or homeowner looking to prune small limbs or fell large trees. Unlike most cutting tools, it requires a lot of maintenance to ensure optimum operation. After several cuts, you might notice that you need to put more pressure on the chainsaw while at work. This is when your chainsaw needs sharpening to continue operating well. So, how do you sharpen your chain’s teeth?

Every cutting tool has an effective method of maintenance; therefore, you cannot sharpen a chainsaw the same way you do with other power tools. Most people find it quite tricky to sharpen a chainsaw and prefer to use it that way for some time. But, did you know that it is dangerous to both the operator and the chainsaw itself?

Using a blunt blade reduces the efficiency of the chainsaw as well as its cutting power. As such, you will spend a long time on a wood that usually took you a few minutes. The engine might also start straining and could damage the chainsaw. To top it up, your tool will be prone to kickbacks, and that might lead to severe injuries that could have otherwise been avoided.

Let’s go with JointForestryTeam.org

The Easiest Way to Sharpen a Chainsaw

How to Know When to Sharpen

How will you know when it is time to sharpen your chainsaw?

  • Putting more pressure on the chainsaw during operation, lack of which the chainsaw will not pull into the wood.
  • Instead of coarse strands, fine sawdust is created during a cross or a split cut.
  • Even when everything is in order (the chain’s tension and lubrication), smoke still comes out.
  • It is difficult to achieve a precise position due to the “rattling” and “bouncing” of the chainsaw during operation.
When to Sharpen a Chainsaw

The Tools You Will Need

Sharpening is a real art, and it requires practice. Before you start the process, here are some of the tools you will need to have.

  1. A pair of gloves: Safety should always be your priority while working with chainsaws. To avoid cuts and other injuries on your arm, wear a pair of gloves before you start sharpening.
  2. A table clamp or a vice: This will hold your chainsaw in place while sharpening. You can do without a table clamp but be careful to keep you chainsaw steady.
  3. A chainsaw sharpener: A round file is the best choice in this case. Select one that matches the diameter of your chainsaw’s teeth. Note that every chainsaw has teeth of a particular size; therefore, not all files will work. Some common sizes include 4.8mm, 4.0mm, and 5.6mm. Ensure you choose the correct one to avoid frustrations.
  4. A depth gauge: This will help ensure that the rakers are maintained at the right height.

If you are not sure of what to buy, you can secure a filing kit available at any chainsaw-related store.

The Process of Sharpening Your Chainsaw

After you have all the required tools, you are now set to begin sharpening the chainsaw. Do it the easiest way by following these procedures.

  1. First, ensure that all the oil is wiped out from the guide bar and the chain brake is engaged to avoid any inconvenience or accidents. If you have your table clamp or vice ready, position your chainsaw well on a flat surface and lock the guide bar on the vice.
  2. Now insert your file guide in the filehandle then tighten the wing-nuts. While sharpening your chainsaw, it is always advisable to consider the angle. The best angle may vary for each chainsaw, but it is usually anywhere between 25 and 30 degrees. Check the chainsaw’s manual to confirm and then position your file holder at that angle. Using a file holder will prevent you from going too deep while sharpening.
The Process of Sharpening Your Chainsaw 1
  • To sharpen, hold the file so that it remains flat on the chain and push it smoothly through the cutter. Repeat the same process at least three times until you are satisfied with the final product. Do it the same number of times for subsequent cutters to ensure uniformity. Also, ensure that you use the same motion and consistent amount of pressure for every tooth.
  • Release the chain brake and rotate to expose more teeth. After you are done with cutters on one side, flip the chainsaw and continue sharpening the rest of the teeth.
  •  Set the depth gauge tool and adjust the height until it comes in contact with a raker. This way, the height of all the cutters will be consistent, ensuring effective sawing.
  • After all the process is done, clean your chainsaw, and get ready for your next job.

Closing Remarks

Ensuring that the chainsaw is working effectively is important for any homeowner or professional in the timber industry. As we have seen, lack of sharpening may have serious repercussions to your tool and even the operator. As a commercial user, it will also waste your time which means less money! Sharpening a chainsaw will only take you a few minutes once you have known all the basic principles.

Although it is an easy task, there are a few things that you must consider before starting. The motion, the pressure required, and the sharpening angles are some the factors. The latter is dependent on the model of your chainsaw; therefore, you will need to consult the user manual. Also, do not forget to regularly clean your tool after work.

Yoy may like:

Timberline Chainsaw Chain Sharpener Reviews

bookmark_borderTimberline Chainsaw Chain Sharpener Reviews

We all want the have a sharp chainsaw, after all, what use would a chainsaw be if the teeth were not sharp enough? Not much use at all!

And so, it’s important to ensure that you are sharpening your chainsaws teeth regularly. In this article, JointForestryTeam will be covering several ways of doing that. But with the focus on one way in particular, by using the Timberline Chainsaw Sharpener.

You might be reading that and wondering what on Earth it is, and how you use it, or even get your hands on it. Well not to worry, this article is going to reveal everything.

Timberline Chainsaw Chain Sharpener Reviews

Why chains should be sharp

If you’re new to chainsaws, as in very very new, you might be wondering why it matters that your chainsaw is sharp.

When you cut wood with a chainsaw, the teeth will lock themselves into the wood, this enables you to cut it at high speeds. Only sharp teeth will be able to quickly and efficiently lock themselves into place and stay there throughout the duration of the cut. Dull teeth will have a higher chances of bouncing off the wood.

Sharp teeth also ensure that all of your cuts are smooth. When you’ve finished cutting, you want to be left with a flat circle not a wooden hill.

Alternatives

Of course, as well as the Timberline Chainsaw Sharpener, there are other alternatives. Some of them cheaper and some of them quicker.

The cheapest method is probably just using a file. This method involves rubbing a thin metal file against each tooth until it’s sharp. But the issue with this is that it takes a lot of time, and often the results aren’t as good as they should be.

Another method would be to an electric sharpener. But the problem with these devices is that they can be very expensive and again, the results are often fat from perfect.

Timberline Chainsaw Sharpener

About Timberline

I have had a look on their website to find out a little bit about the history of Timberline and how they came to create their famous chainsaw sharpener. But unfortunately, because they are such a new company, there wasn’t anything on their website which related to the history or story of the sharpener.

However, one thing that the website does make clear is that this product is reliable and American made. It’s made for people who work with chainsaws on a regular basis, and who take their lumber work very seriously.

So what is it?

The Timberline Chainsaw Sharpener is a very small device. So small infact, it can easily fit into the hands of most American men. But don’t be fooled by it’s size!

It may be small, but it can do the job very well. This contraption fits onto the bar of any chainsaw, and will enable you to make your chainsaw’s teeth as sharp as them can get. It doesn’t require electricity, which means that you can sharpen your chainsaw, even if you’re miles away from any power source. And what’s more, the sharpness from this device is better than the sharpness from many of the electrical sharpeners.

How to use it

I’m going to be honest with you. Using this device is not the quickest way to sharpen a chainsaw. However, it is arguably the most efficient.

What you need to do is attach it to the bar of your chainsaw, adjust the height by inserting the carbide cutter, and then tighten. Then, reinsert the cutter into the other hole, and sharpen the tooth by spinning the crank clockwise. Once you’ve done one tooth, remove the cutter and move the next tooth into place. This is a highly simplified version of the instructions and a better version can be found in many YouTube videos.

Reviews

On several websites, the Timberline chainsaw sharpener has received plenty of positive reviews. And here are just a few of them. …

“I have had my Timberline Chainsaw Sharpener for a little over a year and LOVE IT! This is a great tool and easy to use and will quickly pay for itself.”

“I have to say, I was very wary about purchasing this item because of the cost. If you are wary as well….wary no more!! Though it is time consuming to use this sharpener, makes chains cut through soft, and hardwoods, like a hot knife through butter.”

“The product works as advertised and produces an accurate and sharp (better than factory) chain. It’s very expensive for what it is, but I figure it will pay me back in the long run on reduced chain wear due to sharpening The product works as advertised and produces an accurate and sharp (better than factory) chain. It’s very expensive for what it is, but I figure it will pay me back in the long run on reduced chain wear due to sharpening”

Looking at reviews of this tool from across several websites, it’s clear that it’s a product that does cost quite a bit, but does the job it’s intended to very well, and is certainly worth the high cost.

However, that’s not to say that everyone is a happy customer.

A very select few number of people disagree with the common consensus that this is a great product that’s well worth the money. This small group says that actually, it doesn’t work as well as people claim it does, and that your money is going to be better spent on buying an electric chainsaw sharpener.

Conclusion

When you’re working with a chainsaw, it’s important to make sure that the teeth are as sharp as you can possibly get them. And whilst just using a file, or using an electric sharpener are good, the best option is probably to use the Timberline Chainsaw sharpener. It’s an American made product that does cost a lot of money, and is rather time consuming, but according the most of it’s customers, does do an amazing job, and is worth every penny in the long run.

So if you run your own tree cutting business, then this little contraption is quite simply a must have.